Engine (CSX) – Ceramizer for regeneration of four-stroke engines of sports and extreme vehicles powered by PB, LPG, ON
48,00 €
A preparation that regenerates and protects four-stroke engines of all types, used in sports and extreme vehicles.
In stock
Product description
Ceramizer® CSX is an innovative preparation for engine regeneration. Rebuilds and protects friction surfaces in sports and extreme engines at lightning speed. The process of creating a protective ceramic-metal layer lasts only 100 km. This is a big advantage in the case of engines operated in a sporty and extreme way, because it takes much less time than when covering 1500 km (traditional preparations).
Engine regeneration is carried out without disassembly. After adding the product to the engine oil filler, the entire mechanism can be operated normally. Ceramic-metal coating is created in all areas of friction of metal against metal, with particular emphasis on the most worn areas.
An additional layer regenerates any microdamages, deformations and defects that appear on surfaces subjected to friction forces. The principle of operation is similar to welding an additional, very thin layer of metal.
Why is it worth using Ceramizer® CSX engine regeneration preparation?
- The engine is regenerated and the parts most exposed to wear and tear in extreme driving conditions gain additional protection.
- The engine gains protection against sudden overheating, which can occur with an extreme style of vehicle use.
- The action of the preparation solves the problem of dry starts, because rubbing surfaces with a frequently started engine gain adequate protection.
- The level of fuel consumption is reduced. Savings of 5% can be observed.
Lower fuel consumption
Reduction of oil consumption
Quiet engine operation
Engine regeneration
How to use
| Engine size [litr] | Number of packages for preventive dosing | Number of packages for regenerative dosing |
|---|---|---|
| 1 - 2 l | 1 | 2 |
| 2.1 - 3 l | 2 | 4 |
| 3.1 - 5 l | 3 | 6 |
| 5.1 - 8 l | 4 | 8 |
| 8.1 - 12 l | 5 | 10 |
Downloads
You may be interested in
Find out more
How does the Ceramizer oil additive work?
Ceramization is an innovative technology that allows you to regenerate engines, gearboxes, bridges and other mechanisms in which there is friction of metal against metal. The ceramic layer is formed by combining and diffusing Ceramizer® molecules with metal molecules moving in the oil. The effect of the ceramization process is the creation of a ceramic-metal layer filling the cavities in the metal structure and restoring the nominal state of the mechanism.
Trouble-free regeneration of an extremely operated engine
After the application of the Ceramizer® engine oil additive , the regeneration of the engine, which is used in an extreme way, takes place automatically and does not involve the vehicle user in any way. Only the dose of the oil additive should be applied to the engine oil filler in accordance with the instructions. It is very simple and each driver can do it himself. A visit to the workshop and disassembly of the engine are not required.
Engine additive that improves operation and reduces the risk of failure
The use of the Ceramizer® engine additive allows you to stabilize and improve the operation of the engine. Thanks to it, torque, efficiency, power and engine dynamics are improved. The pressure and temperature of the oil are restored to an optimal level. The action of the engine regeneration preparation particles compensates for the backlash resulting from the wear of the rubbing elements. Starting the engine becomes much easier, and after starting it, its operation is quieter.
Oil additive as a way to longevity of vehicles
The use of an additive to engine oil is a way not only to regenerate the engine, but also to strengthen its parts. Engine components become wear-resistant, so the consequence of Ceramizer® is to extend the life of the engine.
