When investing in a car, you need to make sure that it serves you as long as possible. If previous negligence or the passage of time has led to the unfavorable condition of the engine, it is time to improve its condition.
How to recognize a damaged engine
There are several distinctive features that indicate that your engine needs immediate attention. If the engine takes oil, works loudly or unevenly and it is difficult to start it, these may be the first signs of its degradation. Other reasons for replacing or regenerating the engine may be smoke from the exhaust pipe to blue and increased fuel consumption (0.5-1L/1000 km or more).
Therefore, if your car signals to you that something is wrong with the engine, you have two choices: regenerating the engine or replacing it.
Engine regeneration – engine oil additives
One of the cost-effective activities undertaken in the poor condition of the engine is to try to regenerate it. Cavities in the metal structure can be filled by various types of engine oil additives – but is it worth investing in them? Definitely. The best option is to choose an innovative and effective technology, which is ceramization.
Friction of metal against metal in the engine causes damage. To compensate for and repair them, the Ceramizer engine oil additive creates a ceramic layer after 1500 km from adding the preparation to the oil. Do not exceed 2700 rpm during this time. The regeneration process carried out in this way is extremely efficient – it allows you to maintain engine protection for 70,000 km of mileage (or 6,000 operating hours). This is confirmed by even 252 pages of positive opinions of consumers who decided on Ceramizer after asking themselves: what additives for engine oil will be the best.
Engine replacement – when necessary
Although using Ceramizer does not give any side effects, you can not always opt for it. If you suspect that ceramic regeneration of the engine will not bring the appropriate effect, due to the degree of wear of the power unit, you can consider investing in its replacement. The situation in which the crank comes out sideways is definitely not subject to repair – then you can confidently look for a new engine :).
You can get a used engine from several sources. Choose a power unit from a proven source.
Buy a used engine or regenerate it cheaply?
When replacing the engine, you have to take into account the risk – the “new” power unit may be in a similar or worse condition than our current engine. The internal elements of the replaced mechanism may also be affected by corrosion, which is the result of a long lack of engine start. In addition to the lack of guarantees as to its service life, you need to remember about the cost of replacing the engine, timing, oil and coolant that accompany the replacement of the engine.
Replacing the power unit can therefore be expensive and unnecessary if the damage is not irreversible. A more effective proposal is to try to regenerate. If you focus on ceramization, in the future overhaul of the engine may be unnecessary. The cost of regeneration through ceramization is lower and cost-effective in the long run.
